Qingdao GuanRui Carbon Fiber Technology Co,.Ltd
Electric heating industry comfortable product leader.
Add to Cart
Comprehensive Fever Infrared Carbon Heater Film High Polymer For Snow Melting
1. How The Soft Heating Film Work ?
Soft Heating-Film produced by GUANRUI Technology is a superior and advanced heating material for floors, ceilings,walls and many other place.
The first step, our company is using the carbon paste and graphene combined with the thermally conductive fibre evenly to becomes a 360- degree surround heating fibre, which is called the graphene filament composite fibre.
Meanwhile, we weave the graphene filament composite fibre with the multi-directional conductive fibre and silver -plated copper wire with specific weaving techniques, that is the one we called flexible heating base material.
Furthermore( in the third step), we incorporate the materials of a flexible heating base and the variety of flame retardant insulation polymer into one under the 260* to 300 * high temperature.
Carbon emits heat, far-infrared ray and anion by using an electric resistance. Soft Heating-Film, based on far-infrared radiant heat, gives a longer heating effect than other heating systems. Far-infrared ray and anion are known to effectively suppress odors and growth of germs and boost the metabolism of the human body, not to mention providing a healthier environment.
2. How To Use The Soft Heating Film ?
Underfloor Heating System
Usually there are two different ways:
Application Under floating Floors
(1) Concrete Floor
(2) Depron Insulation Pad
(3) Soft Heating Film
(4) Heating Film Protection Materials
(5) Finishing Materials : Laminate Floor , Tiles.
(6) Thermostat
Application Under Tile Flooring
(1) Concrete Floor
(2) Depron Insulation Pad
(3) PE Film
(4) Soft Heating Film
(5) PE Film
(6) Anhydrite Screed
(7) Tile Flooring
(8) Thermostat
3.The Features Of Soft Heating Film
Using TTWARM heating system as the main source of heat, you will not only save on energy resources, but will also increase by 10% a living space due to absence of pipes, radiators, minimum thickness of material.
TTWARM perforated film has a unique patented surface and woolly coating of NapTouch that allows to save up to 32% on construction mixes and characterizes material as resistant to alkaline influence of tiles adhesive or plaster. High adhesion (bond of surfaces) enables the system mounting under any decorative coating.
Unlike radiator heating, TTWARM evenly warms up the premises, keeps optimum thermal balance of a human body.
TTWARM system does not burn oxygen, provides comfortable warmth, keeps natural humidity of the air, minimizes static electricity.
Set comfortable and regular temperature – with TTWARM thermostat you will be able to do it in no time.
And also you can use the APP control it by your phone.
Well being heating system with the radiation heats from the infrared rays.
High efficiency and speedy heating is achieved. The carbon heating object on the film surface generate very warm infrared radiation heats and a large amount of anions to create an excellent heating effect.(The infrared radiated heat does not have a temperature difference in the upper/lower area. Compared to a flow type, it can give you a more refreshing heating effect at relatively low room temperature.)
No new house symptom or EMI that are harmful to humans.
All you need to do is to place heating film on the floor!
Consumer simply needs to insert it between the floor finishing material and the insulation material. Doesn’t it very easy? Installer doesn’t need to remove the existing floor, instead, place the film on top of it. Enjoy the best effect at a minimum effort and cost.
5. Frequently Asked Questions
This is one of the most common questions about underfloor heating we get & the simple answer is that the running costs are determined by many different factors, however in the majority of cases the running costs should not be a negative factor. A typical new building would perhaps cost around £3-£4 per m² per year to run, so 100 m² free floor area home would cost around £300-£400 per year to heat.
In a conservatory with an insulated floor, electric underfloor heating will be more efficient than radiators due to the fact that you are using the whole floor as a low temperature radiant room heater. In an average sized conservatory used at weekends & winter evenings, the cost may be up to £8 per sqm/annum to run – so around £80 – £100 per year.
Electric floor heating stands out as an excellent choice, especially in areas where there is no mains gas supply & the options are electric, oil, or calor gas.
Electric underfloor heating is also more efficient than radiators & other convected heat & requires no maintenance or servicing & 100% of the electrical energy is turned into heat energy. It is inevitable that more electricity will have to be produced from greener energy sources such as wind power & so in the future, electric underfloor heating should be one of the ‘greenest’ ways to heat your home.
Electric underfloor heating is designed to run with a floor surface temperature at a comfortable 25 – 28 deg C. In areas of high heat loss (such as conservatories) you may need to run it a few degrees higher than this to compensate.
Can the temperature be regulated?
Yes – The digital clock thermostat allows the user full control both the temperature & times the heating system is operating, and also you can control the app throgh the WIFI by your phone.
Are there any special wiring requirements?
For most small rooms the system can often be connected to an existing household wiring circuit via a fused spur, for larger areas a single dedicated circuit from your distribution board will be needed. All electrical work must be made by a qualified electrician who will be able to advise you on what you need.
How long it takes to heat the floor will vary, depending on your sub-floor & its insulation. The better the insulation the quicker it will heat up, 30 minutes to an hour on a wooden floor, but it may take several hours on an un-insulated concrete floor. However, on concrete floors it will also retain the heat in the concrete & therefore take much longer to cool down. Warm-up times can be drastically reduced. To as little as 15-20 minutes using an insulated tile-backer board such as Handyheat Tilebacker board.
Yes all cables are backed by a manufacturers LIFETIME guarantee – the thermostat is guaranteed for two years from date of purchase. The carbon film is guaranteed for FIVE-YEARS
Why would you use a cable kit instead of a cable mat?
The soft heating film is evenly distributed in the floor (without gaps), which means that it better transfers heat onto the floor surface. Thermal control is also more precise. The heating cable can be installed only in the concrete layer. The heating film is installed directly under the flooring with all types of floor coverings (except for tiles). In addition, the installation of the film is much easier on principle and also faster in terms of your house construction.